Face & Body Gel Cleanser - Concentrate Base Instructions

Important Safety Advice ⚠️

✔ Always patch test before use — Apply a small amount of finished soap to a small area of skin (inner wrist or elbow). Wait 24 hours to check for any irritation before broader use.

✔ Essential Oil Safety — Do not exceed 1% essential oil of total cleanser weight. Some oils may irritate sensitive skin — avoid on infants, young children, or sensitive areas without professional advice.

✔ Keep out of reach of children.

✔ Avoid contact with eyes — If contact occurs, rinse thoroughly with water.

✔ For external use only — This product is not edible.

✔ Allergy Awareness — Always check the ingredient list carefully. Discontinue use if irritation occurs.

✔ Handle with care.

💡 Tip: If gifting or selling your cleanser, always label it clearly and include a full ingredient list for your recipient.

Important Preservation Information

⚠️ Important: This base includes a built-in preservative system, allowing you to safely dilute up to 1 part base to 2 parts distilled water. If you wish to dilute further, we recommend adding an additional appropriate preservative to your final product for safety.

How to Use Your Body Cleansing Gel Base – Concentrate

A 100% Natural, Soap-Free Gel Cleanser Designed to Flex With You.

This base is ultra-concentrated — giving you full creative and cost-efficient control over your final product. Perfect for gentle face washes or luxurious body cleansers.

Dilution Guide 💧

1kg of concentrate makes approx. 1.5–3kg of finished product, depending on your desired thickness.

Product Style	Gel Base : Water (Or Water Based Ingredient) Ratio	Notes
Thick & Decadent Gel Cleanser	1 : 0.5	Ideal for a rich, body wash feel.
Everyday Facial Gel Cleanser	1 : 1	Balanced, gentle daily cleanser.
Lightweight Hydrating Gel Cleanser	1 : 2	Soft, refreshing and economical.

→ Always use distilled or filtered water for best results.

How to Dilute

1. Pre-measure your Gel Base and boiled distilled water separately.
2. Slowly add water (OR water-based ingredients) into the Gel Base, stirring gently to avoid bubbles.
3. Heat the mix in the microwave in 10–20 second bursts or the Double Boiler method (stove top), stirring gently after each burst, until it reaches 75–80°C. Stir gently until well blended.
4. Allow your mixture to settle overnight for best clarity and consistency.

💡 Optional: Once diluted, thicken again (if desired) by adding melted gel base or gums. Salt solutions will not thicken this base.

How to Customise Your Cleanser

Make it your own by adding skin-friendly, water-based ingredients or essential oils.

Optional Water-Based Additions (Replace Water Content)

• Floral Waters / Hydrosols
• Aloe Vera Juice
• Cucumber Water
• Herbal Infusions (Chamomile, Green Tea)
• Glycerites (Plant Extracts in Glycerine)
• Panthenol (Vitamin B5 Solution)
• Water-Soluble Botanical Extracts

Adding Essential Oils or Carrier Oils

Recommended usage: 0.5%–1% of total product weight.

1. Add essential oils a few drops at a time.
2. Stir gently to combine.
3. Allow to settle overnight.

⚠️ Note: Some essential oils may cause the gel to thicken or thin. Adjust with water or melted base as needed.

💡 Optional: For a clear, stable finish, use a professional solubiliser.

Adding Colour

1. Add a few drops of Natural Colour Extracts into your finished gel.
2. Stir gently and build colour gradually.

Adding Clays

Do not add clay directly to the melted, diluted gel base; mix clay in water or glycerine and then add that paste slowly to the gel. Don’t exceed 2% clay of total finished gel weight (e.g. 250g gel base = 5g clay).

Tip: Sometimes, too much clay can be drying on the skin; start with less and adjust later.

✨ Example Recipe Formula (250ml finished cleanser)

• 100g Gel Cleanser Base
• 100ml Floral Water
• 50ml Distilled/Filtered Water
• 5g Clay (dispersed in water or glycerine)

---

🧂 Method

1. Prep

• Ensure all tools and your bottle are clean and dry.
• Pre-measure the cleanser base, floral water, and distilled water separately.

2. Combine Liquids

• Add 100g Gel Base to a heatproof bowl.
• Slowly add 50ml Distilled Water & 100ml Floral Water, stirring gently to avoid bubbles.

3. Warm & Blend

• Heat the mix in the microwave in 10–20 second bursts until it reaches 80°C.
• Stir gently between bursts until smooth and consistent.
• Allow to cool slightly.

4. Add Clay (Optional)

• In a small dish, pre-mix your 1–5g of clay with a spoonful of water to form a smooth slurry.
• Slowly stir the slurry into your cleanser until evenly combined.

Tip: Too much clay can be drying — start with less and see how it feels before adding more.

5. Bottle

• Pour the finished cleanser into your 250ml flip-top bottle. (A piping bag may help if you don’t have a funnel.)
• Let it settle overnight for best clarity and texture.

---

Final Tips

✔ Always patch test before full use.

✔ Store in a cool, dry place.

✔ Shake gently before use if separation occurs.

✔ Keep away from eyes. External use only.